Prodigy Condensable Research
Competitive
Comparison
There appears to be many visible
gaps at Surefil’s margin that can cause leakage and
discoloration. Considering that the shrinkage in this case
appears relatively close to that of traditional hybrids
(2.3%), it could be speculated that a risk still exists
when bulk-curing this material.
Solitaire’s large particles
make it difficult to get and hold a polish and the 3.4%
shrinkage figure obtained was higher than some other hybrids.
Prodigy Condensable
shares the same proven filler that has brought you top
performance from Kerr composites since 1985 so there are
no compromises. There are no visible gaps at the margin
due to the combination of low shrinkage and the excellent
adhesive properties of OptiBond Solo Plus.
|
|
