Temp-Bond™

Temporization

Temporary Dental Cement

Temp-Bond™ is a temporary cement for trial cementing restorations or cementing temporary crowns and bridges. Temp-Bond and Temp-Bond™ NE are available in automix syringe, tube delivery and Unidose. Temp-Bond withstands mastication, seals the temporary restoration and prevents seepage, yet affords easy removal when desired. Temp-Bond NE is a non-eugenol temporary dental cement that will not inhibit the polymerization of permanent resin cements and acrylic temporaries. Resin-based Temp-Bond™ Clear with Triclosan is the most translucent provisional cement in the market, ensuring superior esthetics. Available in a convenient automix syringe, it offers a dual cure for added security and flexibility, ease of handling, excellent mechanical retention, and easy removal from preparations.

  • Multiple formulations. Temp-Bond, Temp-Bond NE and Temp-Bond Clear with Triclosan for all of your temporary restoration needs.
  • Delivery choices. Unidose, tubes and new automix syringe offer flexibility in delivery options.
  • Flows and mixes easily. Delivers optimal consistency for solid, complete seating of temporary restorations.
  • High bond strength. Heightens patient confidence. Prevents leakage and sensitivity to cold and heat.
  • Easy to remove. Enhances patient comfort. Minimizes potential for damage to the prep or temporary restoration

 DT_TCAStatue_Logo_2016 TP_CementsTemporaryNonEugenol

 

Testimonials

"Temp-Bond Clear with Triclosan's strength gives the clinician the peace of mind that the restoration will stay in place for the duration of time needed."
Dr. Stephen D. Poss

"In this age of cosmetic dentistry, Temp-Bond Clear with Triclosan is THE temporary cement for provisionally luting anterior temporary restorations to place."
Dr. Gary Radz

FAQs

What should be used in place of Temp-Bond modifier since it has been discontinued?

Petrolatum e.g. vaseline should be used in place of Temp-Bond modifier.

What solvent may be used to remove Temp-Bond NE from prepared teeth and crowns?

Solitine liquid cream solvent can be used to remove Temp-Bond and Temp-Bond NE. This product should not be used in the mouth, but can be used on temporary and permanent crowns and bridges outside of the mouth. To remove Temp-Bond from teeth in the mouth, the best procedure is to prophy the teeth with flour pumice.

Temp-Bond is not setting up. Why?

If the batch number of the base and the accelerator are far apart, it is likely that the base and the accelerator are not matched. Bases and accelerators are matched to give a specific working time. Even though all bases are made the same, there are slight variations in the reactivity of the base paste. For this reason, we will match each batch of base with a suitable catalyst. For example, if the base has inherently faster working time, that base will be matched with a catalyst with a slower working time. This will give the proper handling characteristic. For this reason, it is not recommended to use a base from one kit of Temp-Bond, with an accelerator from another kit.

How will a eugenol containing temporary cement like Temp-Bond affect composite resin cements, like Nexus?

Eugenol containing temporary cements, like Temp-Bond, will inhibit the polymerization of resin cements, including Nexus

How was the Temp-Bond Modifier (now discontinued) used?

Temp-Bond Modifier was used to keep Temp-Bond from setting hard. A small amount is mixed in with the base and accelerator. This is often done when temporarily cementing a crown that fits the preparation very well. The dentist needs to be very careful when cementing a permanent restoration temporarily. It is not unusual that when this is done the dentist may have difficulty removing the restoration, even if Temp-Bond Modifier has been used.

How does Temp-Bond compare to Temp-Bond NE?

The same base paste is used in Temp-Bond NE as is used in Temp-Bond. The accelerator in Temp-Bond NE is a traditional resin modified formulation, based on the use of ortho ethoxy benzoic acid as the setting reactant.

How do you get Temp-Bond out of clothes?

Solitine will dissolve Temp-Bond. First check that the Solitine is compatible with the fabric that the Temp-Bond is in. Test a small amount of Solitine on the fabric where it will not be noticed if it does cause damage.

How can I make a bridge cemented with Temp-Bond easier to take off?

Mix in some Temp-Bond Modifier or Petrolatum into the Temp-Bond base before mixing with the accelerator. This will keep the Temp-Bond from setting as hard and will consequently make the bridge easier to remove. Well fitting abutments may still pose a problem.

Can Temp-Bond or Temp-Bond NE be used as a temporary restorative material?

Temp-Bond is used for temporary cementing crowns and bridges. It is not recommended as a temporary restorative material. It does not have good wear resistance and would wear away rather quickly.

Documentation

Sort by

Displaying 1 - 10 of 150
Dental Product Shopper - Evaluator Choice June 2017
Document Type: Studies / Articles
Language: English (US)
Region: United States, Canada
Release date: 
Tuesday, June 27, 2017 - 01:06
File size: 
0.77 mb
Temp Bond Accelerator (Czech Republic/Czech) SDS
Document Type: Safety Data Sheets (SDS)
Language: Czech
Region: Czech Republic
Release date: 
Friday, August 28, 2015 - 01:08
File size: 
0.41 mb
Temp Bond Accelerator (Denmark/Danish) SDS
Document Type: Safety Data Sheets (SDS)
Language: Danish
Region: Denmark
Release date: 
Tuesday, September 30, 2014 - 01:09
File size: 
0.08 mb
Temp Bond Accelerator (Finland/Finnish) SDS
Document Type: Safety Data Sheets (SDS)
Language: Finnish
Region: Finland
Release date: 
Tuesday, September 30, 2014 - 01:09
File size: 
0.08 mb
Temp Bond Accelerator (France/French) SDS
Document Type: Safety Data Sheets (SDS)
Language: French
Region: France
Release date: 
Friday, August 28, 2015 - 01:08
File size: 
0.38 mb
Temp Bond Accelerator (Germany/German) SDS
Document Type: Safety Data Sheets (SDS)
Language: German
Region: Germany
Release date: 
Friday, August 28, 2015 - 01:08
File size: 
0.40 mb
Temp Bond Accelerator (Italy/Italian) SDS
Document Type: Safety Data Sheets (SDS)
Language: Italian
Region: Italy
Release date: 
Friday, August 28, 2015 - 01:08
File size: 
0.37 mb
Temp Bond Accelerator (Norway/Norwegian) SDS
Document Type: Safety Data Sheets (SDS)
Language: Norwegian
Region: Norway
Release date: 
Tuesday, September 30, 2014 - 01:09
File size: 
0.08 mb
Temp Bond Accelerator (Poland/Polish) SDS
Document Type: Safety Data Sheets (SDS)
Language: Polish
Region: Poland
Release date: 
Friday, August 28, 2015 - 01:08
File size: 
0.42 mb
Temp Bond Accelerator (Portugal/Portuguese (Portugal)) SDS
Document Type: Safety Data Sheets (SDS)
Language: Portuguese (Portugal)
Region: Portugal
Release date: 
Friday, August 28, 2015 - 01:08
File size: 
0.41 mb