Take 1™ Advanced™

Impression Materials

VPS Impression Material

Outstanding tear strength and elongation. Strong, flexible impression material stretches around undercuts without tearing or distorting.
Hydrophilic dental wash material. Displaces intraoral fluids to produce impressions with great detail and no voids or gaps.
Excellent dimensional stability. Impression will not distort due to dimensional change or temporary deformation.
Widest selection of viscosities, set times and delivery methods. Helps overcome common difficulties in impression taking, and matches doctor preference.

Take 1 Advanced vinylpolysiloxane (VPS) impression material employs Kerr's long history of expertise in developing high-performance impression materials, along with recent technological advancements, to deliver a VPS impression material with the optimum combination of physical properties: strength, elasticity, dimensional stability and the ability to register detail in any environment. Furthermore, Take 1 Advanced comes in the widest selection of set times, delivery systems and consistencies available on the market today - so you always have the perfect combination of mechanical properties in a material that feels like it was designed just for your technique preferences.

Packaging
Troubleshooting Guide
Documentation
More Info

Kits

34064Take 1 Advanced- Cartridge Intro Kit2 Cartridges (50ml) LB Wash 3 Cartridges (50 ml) Tray (Fast Set) 1 Cartridge (50 ml) Bite Registration 1 Extruder 6 Small Mix tips 6 Intraoral Syringe Tips (Small Universal) 6 Large Mix tips

Two Packs

33951Take 1 Advanced Two-Pack - Light Body Wash - Regular Set (Orange)2 Cartridges (50ml), 6 Mixing Tips

33953Take 1 Advanced Two-Pack - Light Body Wash - Fast Set (Orange)2 Cartridges (50ml), 6 Mixing Tips

33955Take 1 Advanced Two-Pack - Light Body Wash - Super Fast Set (Orange)2 Cartridges (50ml), 6 Mixing Tips

33957Take 1 Advanced Two-Pack - Medium Body/Monophase Regular Set (Light Blue)2 Cartridges (50ml), 6 Mixing Tips

33959Take 1 Advanced Two-Pack - Medium Body/Monophase - Fast Set (Light Blue)2 Cartridges (50ml), 6 Mixing Tips

33961Take 1 Advanced Two-Pack - Medium Body/Monophase - Super Fast (Light Blue)2 Cartridges (50ml), 6 Mixing Tips

33963Take 1 Advanced Two-Pack - Tray - Regular Set (Dark Blue)2 Cartridges (50ml), 6 Mixing Tips

33965Take 1 Advanced Two-Pack - Tray - Fast Set (Dark Blue)2 Cartridges (50ml), 6 Mixing Tips

33967Take 1 Advanced Two-Pack - Tray - Super Fast Set (Dark Blue)2 Cartridges (50ml), 6 Mixing Tips

33975Take 1 Advanced Two-Pack - Bite Registration2 Cartridges (50ml), 6 Mixing Tips

34457Take 1 Advanced Two-Pack - Rigid Tray - Fast Set (Dark Green)2 Cartridges (50ml), 6 Mixing Tips

Value Packs

33952Take 1 Advanced Value Pack - Light Body Wash - Regular Set (Orange)24 Cartridges (50 ml)

33954Take 1 Advanced Value Pack - Light Body Wash - Fast Set (Orange)24 Cartridges (50 ml)

33956Take 1 Advanced Value Pack - Light Body Wash - Super Fast Set (Orange)24 Cartridges (50 ml)

33958Take 1 Advanced Value Pack - Medium Body/Monophase - Regular Set (Light Blue)24 Cartridges (50 ml)

33960Take 1 Advanced Value Pack - Medium Body/Monophase - Fast Set (Light Blue)24 Cartridges (50 ml)

33962Take 1 Advanced Value Pack - Medium Body/Monophase - Super Fast (Light Blue)24 Cartridges (50 ml)

33966Take 1 Advanced Value Pack - Tray - Fast Set (Dark Blue)24 Cartridges (50 ml)

35186Take 1 Advanced Value Pack - Rigid Tray - Fast Set (Dark Green)24 Cartridges (50 ml)

35187Take 1 Advanced Value Pack - Rigid Tray - Super Fast Set (Dark Green)24 Cartridges (50ml)

Accessories

16622VPS Adhesive15 ml bottle

20731Intraoral Syringe Tips, Large 100 disposables

25777VPS Adhesive 60 ml bottle

27517Intraoral Syringe Tips, Small Universal100 disposables

29333Mix Tip Refill - Largepkg of 48 tips

29363Mix Tips Refill - Smallpkg of 48 tips

34746Dynamic Mixing Tips for Volume 50 tips, 2 bayonet rings

Volume

34688Medium/Monophase Regular Set2 Hard Cartridges (380 ml)

34689Medium/Monophase Fast Set2 Hard Cartridges (380 ml)

34690Medium/Monophase Super Fast Set2 Hard Cartridges (380 ml)

34695Volume Tray Regular Set2 Hard Cartridges (380 ml)

34696Volume Tray Fast Set2 Hard Cartridges (380 ml)

34697Volume Tray Super Fast Set2 Hard Cartridges (380 ml)

34825Rigid Tray Fast Set (Dark Green)2 Hard Cartridges (380 ml)

34826Rigid Tray Super Fast Set (Dark Green)2 Hard Cartridges (380 ml)

Putty

34070Putty1 Base (400 g), 1 Catalyst (400 g)

Troubleshooting Guide

Problem	Evidence	Cause	Solution
Premature Set	Abrupt change from heavy to light-body material Muted detail around margin	Set time of wash/tray material not synched Exceeded working time of material	Begin mix of heavy and light viscosity concurrently Verify set times for heavy and light viscosities match Observe working time of materials
Deformation/Dimensional Change	Crowns too tall/short Open contacts Crown will not seat	Insufficient mix of material Impression removed too early Tray movement after seating Insufficient material elasticity Fluid absorption during disinfection process	Verify material is adequately mixed before seating and completely set prior to removal Use passive force to maintain tray position when using open-bite technique Verify no tooth contact with tray sides or impingement in closed-bite technique Choose material with adequate elasticity Follow disinfection protocol carefully
Tearing at Margin	Visible tears at margin Lack of flash extending apically around entire preparation	Material has insufficient tear strength Presence of severe undercuts Insufficient sulcular expansion	Use material with adequate tear strength Consider blocking out undercuts, especially in cases with gingival recession Ensure at least .5 mm sulcular expansion
Surface Inhibition or “Non-set”	Unset or mottled surface around preparation Lack of detail Shiny/wet appearance	Contamination due to latex gloves; direct contact with material or residue left on teeth Contamination due to temporary materials or composite Expired material or exceeded material shelf life	Use latex-free gloves when handling VPS material Rinse preparation area thoroughly after using other restorative materials Use automated mixing device to minimize exposure to contaminants Do not use expired material
Poor model detail	Small bubbles/indentations in cast Powdery cusps	Release of hydrogen gas from VPS impression after pouring cast Tooth contact with mesh lining of closed-bite impression tray	Follow manufacturer instructions regarding any delays for pouring models after taking impression Place cotton roll on contra-lateral side when using closed-bite trays to prevent direct tooth contact with tray; this prevents water from leaching through tray after cast has been poured
Voids in wash material	Visible voids in wash material around tooth preparation	Bubbles incorporated into material during mixing or loading syringe Bubbles incorporated while syringing material intraorally	Use automix systems Syringe material intraorally in continuous stream around each preparation; do not lift syringe tip from material
Insufficient or excessive compression	Insufficient: wash material flows away from preparation area Excessive: wash material displaced from preparation area; “burn through”	Insufficient compression of wash material from adjacent tooth/tray or heavy-body material Excessive compression of wash material due to high viscosity of tray material	Use tray viscosity material with greater compressive force, or use custom tray Use tray material with lower viscosity to avoid displacing wash material
Incomplete margin	Voids or “jumps” on margin	Inadequate tissue management Contamination from intraoral fluids Insufficient compression of wash material	Use Expasyl™ retraction paste to open sulcus and help maintain dry field Use hydrophilic wash material Select tray viscosity with adequate compression
Tooth contact with tray	Visible impingement	Incorrect size tray Tray seating not aligned with dentition	Verify tray has enough room for 2 mm of impression material between tooth and tray walls